Dry screw vacuum pump and cylinder of matching principle
Every big thing is made up of small things, and in some cases, these small things can even determine the success of the big things。 Therefore, when we choose small parts, we must pay attention to the matching of the two, in order to play a big role。 Today, we will take a look at the matching principle of dry screw vacuum pump and cylinder!
彩63彩票官网1。 The roundness and cylindricity of the cylinder shall comply with relevant regulations。
2。 Measure the roundness and cylindricity of dry screw vacuum pump cylinder, and determine the boring cylinder or replacement according to its wear degree。
3. The diameter of the rear cylinder of the dry screw vacuum pump shall not exceed 2 of the original size, and the cylinder wall shall not be thinner than 1 / 12 of the original wall thickness.
4. The cylinder water jacket of dry screw vacuum pump is not allowed to have cracks or leakage.
5。 The inner surface of the cylinder shall be free of cracks, sand holes, scars, grooves and other defects, and the surface roughness shall be 1。6。
Cylinder is very important to dry screw vacuum pump, so we need to maintain it. In fact, no matter which part it is, we should take it seriously in the production process. Because, only if the quality of the parts themselves is high, can the products be better.全民彩开户 乐彩网登陆 乐彩网网址 彩83彩票网址多少 安徽快3走势 全民彩开奖 彩83彩票注册 湖北快3代理 乐彩网手机app下载 彩63彩票登陆